ulinarp by allu
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 119.
Tone for oscillator 2 is set to 67 and is modulated by LFO 2.
LFO 2 mod-matrix 1 modulation amount for tone for oscillator 2 is 23.
Volume (VCA) volume
Amplification level is set to 0dB (170) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 231.
Pan spread is manually set to 33.
Oscillators ranges timbre
Oscillators 1 range is 16'.
Oscillators 2 range is 8'.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 24.84Hz (12).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 199.99Hz (59) and is modulated by Note Vel, LFO 1, LFO 2, VCF Env.
LFO 1 mod-matrix 2 modulation amount for low-pass filter cut-off frequency is -1.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 90.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 117.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 158.
Note Num direct modulation amount for low-pass filter envelope amount is 121.
Filter resonance is set to 14 and is modulated by LFO 2.
LFO 2 mod-matrix 5 modulation amount for filter resonance is -11.
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±22 cents (111).
Oscillators drift level is manually set to 23. Drift rate is 16
Performance triggering timbre
Envelope triggering mode is set to one-shot.
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to -6 semitones and is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 2 pitch is 120.
Portamento pitch
Portamento time is manually set to 4.
Arpeggiator pitch
Arpeggiator rate is 148 bpm with a clock divider of 1/8 and is set to key synchronisation mode.
Arpeggiator gate is manually set to 162.
Arpeggiator mode is As Played (9) over 2 octaves. Looping gate/velocity pattern is preset pattern 26.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 100. Effect 2 level is manually set to 100. Effect 3 level is off. Effect 4 level is manually set to 80.
Delay & Reverb fx
not yet complete
Chamber Reverb fx
not yet complete
Rich Plate Reverb fx
not yet complete
Mod Wheel modulator
Controls Delay & Reverb Param 11, Rich Plate Reverb Param 5, Mod Env Release Time.
| function | type | destination | amount |
|---|---|---|---|
| fx | matrix | Delay & Reverb Param 11 | 74 |
| fx | matrix | Rich Plate Reverb Param 5 | 53 |
| matrix | Mod Env Release Time | -7 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 121 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 117 |
| menu | VCF Envelope Velocity Sensitivity | 158 | |
| menu | VCA Envelope Velocity Sensitivity | 64 |
LFO 1 modulator
Controls OSC 2 Pitch, VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 2 Pitch | 120 |
| timbre | matrix | VCF Cut-off Frequency | -1 |
| name | value |
|---|---|
| LFO 1 Rate | 0.17Hz (49) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 11 |
LFO 2 modulator
Controls VCF Cut-off Frequency, OSC 2 Tone Modulation Depth, VCF Resonance.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 90 |
| timbre | matrix | OSC 2 Tone Modulation Depth | 23 |
| timbre | matrix | VCF Resonance | -11 |
| name | value |
|---|---|
| LFO 2 Rate | 0.32Hz (71) |
| LFO 2 Delay / Fade | 1.37s (53) |
| LFO 2 Shape | Ramp Down |
| LFO 2 Key Sync | on |
| LFO 2 Arp Sync | on |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 231 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.24s (135) |
| VCA Envelope Sustain Level | 70% (178) |
| VCA Envelope Release Time | 0.24s (40) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 117 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 122 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 117 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0.9s (112) |
| VCF Envelope Sustain Level | 36% (91) |
| VCF Envelope Release Time | 1.4s (146) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 117 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 85 |
| VCF Envelope Attack Curve | 81 |
Ctrl Seq modulator
Controls VCA Gain for Active Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | matrix | VCA Gain for Active Voices | 31 |
| name | value |
|---|---|
| Ctrl Sequencer Enable | on |
| Ctrl Sequencer Clock Divider | 12 |
| Sequence Length | 14 |
| Sequencer Swing Timing | 0 |
| Key Sync & Loop | 0 |
| Slew Rate | 0 |
| Seq Step Value 1 | 255 |
| Seq Step Value 2 | 1 |
| Seq Step Value 3 | 230 |
| Seq Step Value 4 | 1 |
| Seq Step Value 5 | 204 |
| Seq Step Value 6 | 1 |
| Seq Step Value 7 | 255 |
| Seq Step Value 8 | 1 |
| Seq Step Value 9 | 238 |
| Seq Step Value 10 | 1 |
| Seq Step Value 11 | 203 |
| Seq Step Value 12 | 1 |
| Seq Step Value 13 | 225 |
| Seq Step Value 14 | 1 |