lostinspace by allu
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 41.
Tone for oscillator 2 is off.
Oscillators ranges timbre
Oscillators 1 range is 4'.
Oscillators 2 range is 4'.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 327.57Hz (80) and is modulated by Note Vel, LFO 1, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 45.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 127.
Note Num direct modulation amount for low-pass filter envelope amount is 196.
Filter resonance is set to 46 and is modulated by LFO 1.
LFO 1 mod-matrix 5 modulation amount for filter resonance is 17.
Performance triggering timbre
Envelope triggering mode is set to legato.
Arpeggiator pitch
Arpeggiator rate is 138 bpm with a clock divider of 1/16 and is set to key synchronisation mode.
Arpeggiator gate is manually set to 133.
Arpeggiator mode is Up (0) over 2 octaves.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 100.
Flanger fx
not yet complete
Stereo Imaging fx
not yet complete
Delay & Reverb fx
not yet complete
Phase fx
not yet complete
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 196 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 45 |
| menu | VCF Envelope Velocity Sensitivity | 127 | |
| menu | VCA Envelope Velocity Sensitivity | 80 |
LFO 1 modulator
Controls VCA Gain for All Voices, All Release Times, VCF Cut-off Frequency, VCF Resonance.
| function | type | destination | amount |
|---|---|---|---|
| volume | matrix | VCA Gain for All Voices | 22 |
| timbre,volume,pitch | matrix | All Release Times | 20 |
| volume | menu-indirect | VCA Gain for All Voices | 252 |
| timbre | fader-indirect | VCF Cut-off Frequency | 45 |
| timbre | matrix | VCF Resonance | 17 |
| name | value |
|---|---|
| LFO 1 Rate | 0.11Hz (35) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Sample & Hold |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 252 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.24s (135) |
| VCA Envelope Sustain Level | 39% (99) |
| VCA Envelope Release Time | 1.28s (138) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 127 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 127 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 45 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0s (0) |
| VCF Envelope Sustain Level | 4% (11) |
| VCF Envelope Release Time | 30.22s (250) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 158 |
| VCF Envelope Decay Curve | 105 |
| VCF Envelope Sustain Curve | 138 |
| VCF Envelope Attack Curve | 148 |