VBGA572IFXKR7LZA Talkeys OS by OscillatorSynk @ Deep[Re]Mind

Talkeys OS by OscillatorSynk

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 255.

Tone for oscillator 2 is manually set to 86.

Volume (VCA) volume

Amplification level is set to -6.56dB (77) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 11.

Oscillators ranges timbre

Oscillators 1 range is 16'.

Oscillators 2 range is 8'.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 105.34Hz (92).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 177.83Hz (54) and is modulated by Note Vel, VCF Env.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 182.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 216.

Note Num direct modulation amount for low-pass filter envelope amount is 115.

Filter has no resonance.

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±16 cents (82).

Oscillators drift level is manually set to 20. Drift rate is 0

Performance triggering timbre

Envelope triggering mode is set to mono.

Oscillators are reset on keyboard presses.

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to -6 semitones and is modulated by Mod Wheel.

Mod Wheel mod-matrix 2 modulation amount for oscillator 2 pitch is 21.

Oscillator 2 pitch modulation is modulated by Voice Num.

Voice Num mod-matrix 1 modulation amount for oscillator 2 pitch modulation is 58.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is off. Effect 2 level is off. Effect 3 level is manually set to 34. Effect 4 level is manually set to 10.

Noise Gate fx

not yet complete

Ambient Reverb fx

not yet complete


Mod Wheel modulator

Controls OSC 2 Pitch.

functiontypedestinationamount
pitch matrix OSC 2 Pitch 21

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 115

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 182
menu VCF Envelope Velocity Sensitivity 216

Voice Num modulator

Controls OSC 2 Pitch Modulation Depth.

functiontypedestinationamount
pitch matrix OSC 2 Pitch Modulation Depth 58

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 1.13s (128)
VCA Envelope Sustain Level 100% (255)
VCA Envelope Release Time 1.13s (128)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 182
namevalue
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 1.57s (158)
VCF Envelope Sustain Level 49% (126)
VCF Envelope Release Time 1.13s (128)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0