Please register and login in order to share patches.

Sweep & Fold RD by Behringer

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is set to 77% (50% is perfectly square, 100% is very short pulsewave) and is modulated by Mod Env.

Mod Env mod-matrix 1 modulation amount for pulse width of square oscillator is 77.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 255.

Tone for oscillator 2 is off.

Volume (VCA) volume

Amplification level is set to 1.06dB (185) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 96.

Oscillators ranges timbre

Oscillators 1 range is 8'.

Oscillators 2 range is 16'.

Noise timbre

Noise level is set to 0 and is modulated by Mod Wheel, LFO 2.

Mod Wheel modulates LFO 2 (Unipolar) (amount: 70), that in turn modulates Noise level.

LFO 2 mod-matrix 2 modulation amount for Noise level is 70.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 33.16Hz (28).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 549.28Hz (102) and is modulated by Mod Wheel, Note Vel, LFO 1, LFO 2, VCF Env.

Mod Wheel mod-matrix 3 modulation amount for low-pass filter cut-off frequency is 127.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 60.

Low-pass filter envelope amount is modulated by Note Vel, Mod Wheel, LFO 1, LFO 2, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 255.

Mod Wheel modulates LFO 1 (amount: 68), that in turn modulates low-pass filter envelope amount.

LFO 1 mod-matrix 4 modulation amount for low-pass filter envelope amount is 68. LFO 1 modulates LFO 1 (amount: 68), that in turn modulates low-pass filter envelope amount.

LFO 2 modulates LFO 1 (amount: 68), that in turn modulates low-pass filter envelope amount.

Note Num direct modulation amount for low-pass filter envelope amount is 115.

Filter resonance is statically set to 63% (162).

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±21 cents (110).

Oscillators drift level is manually set to 20. Drift rate is 64

Performance triggering timbre

Envelope triggering mode is set to re-trigger.

Portamento pitch

Portamento time is manually set to 50.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 33. Effect 2 level is manually set to 33. Effect 3 level is manually set to 79. Effect 4 level is manually set to 100.

Multi-Band Distortion fx

not yet complete

Decimator Delay fx

not yet complete

Auto-Panning fx

not yet complete

Midas Equaliser fx

not yet complete

Mod Wheel modulator

Controls VCF Cut-off Frequency, LFO 2 Rate, LFO 1 Rate, VCF Envelope, LFO 1 Delay Time, Noise Level.

function	type	destination	amount
timbre	matrix	VCF Cut-off Frequency	127
	matrix	LFO 2 Rate	127
	indirect	LFO 1 Rate	104
timbre	indirect	VCF Envelope	68
timbre	fader-indirect	VCF Cut-off Frequency	60
	indirect	LFO 1 Delay Time	0
timbre	indirect	Noise Level	70

Note Num modulator

Controls VCF Keyboard Tracking.

function	type	destination	amount
timbre	fader	VCF Keyboard Tracking	115

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.

function	type	destination	amount
timbre	fader-indirect	VCF Cut-off Frequency	60
	menu	VCF Envelope Velocity Sensitivity	255

LFO 1 modulator

Controls VCF Envelope, VCF Cut-off Frequency, LFO 1 Delay Time.

function	type	destination	amount
timbre	matrix	VCF Envelope	68
timbre	fader-indirect	VCF Cut-off Frequency	60
	matrix	LFO 1 Delay Time	0
timbre	indirect	VCF Envelope	68
timbre	fader-indirect	VCF Cut-off Frequency	60

name	value
LFO 1 Rate	0.04Hz (0)
LFO 1 Delay / Fade	2.48s (96)
LFO 1 Shape	Triangle
LFO 1 Key Sync	on
LFO 1 Arp Sync	off
LFO 1 Mono Mode	0
LFO 1 Slew Rate	0

LFO 2 modulator

Controls LFO 1 Rate, VCF Envelope, VCF Cut-off Frequency, LFO 1 Delay Time, Noise Level.

function	type	destination	amount
	matrix	LFO 1 Rate	104
timbre	indirect	VCF Envelope	68
timbre	fader-indirect	VCF Cut-off Frequency	60
	indirect	LFO 1 Delay Time	0
timbre	matrix	Noise Level	70

name	value
LFO 2 Rate	0.74Hz (100)
LFO 2 Delay / Fade	3.7s (143)
LFO 2 Shape	Square
LFO 2 Key Sync	off
LFO 2 Arp Sync	off
LFO 2 Mono Mode	0
LFO 2 Slew Rate	0

VCA Env modulator

Controls VCA Gain for All Voices.

function	type	destination	amount
volume	menu	VCA Gain for All Voices	255

name	value
VCA Envelope Attack Time	0s (0)
VCA Envelope Decay Time	32s (255)
VCA Envelope Sustain Level	86% (220)
VCA Envelope Release Time	32s (255)
VCA Envelope Trigger Mode	Key (0)
VCA Envelope Attack Curve	0
VCA Envelope Decay Curve	51
VCA Envelope Sustain Curve	0
VCA Envelope Attack Curve	12

VCF Env modulator

Controls VCF Cut-off Frequency.

function	type	destination	amount
timbre	fader	VCF Cut-off Frequency	60

name	value
VCF Envelope Attack Time	0s (0)
VCF Envelope Decay Time	1.44s (149)
VCF Envelope Sustain Level	0% (0)
VCF Envelope Release Time	0s (0)
VCF Envelope Trigger Mode	Loop (3)
VCF Envelope Attack Curve	77
VCF Envelope Decay Curve	92
VCF Envelope Sustain Curve	0
VCF Envelope Attack Curve	0

Mod Env modulator

Controls OSC 1 Pulse Width Modulation Depth, Mod Matrix Routing 6 Depth, LFO 2 Rate.

function	type	destination	amount
timbre	matrix	OSC 1 Pulse Width Modulation Depth	77
	matrix	Mod Matrix Routing 6 Depth	74
	cross-mod	LFO 2 Rate	255*202

name	value
Mod Envelope Attack Time	1.5s (153)
Mod Envelope Decay Time	4.95s (179)
Mod Envelope Sustain Level	39% (99)
Mod Envelope Release Time	1.75s (170)
Mod Envelope Trigger Mode	Key (0)
Mod Envelope Attack Curve	255
Mod Envelope Decay Curve	0
Mod Envelope Sustain Curve	0
Mod Envelope Attack Curve	0