Strident KeysOS by OscillatorSynk
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is set to 79% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 1.
LFO 1 direct modulation amount for pulse width of square oscillator is 147.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is manually set to 84.
Oscillators ranges timbre
Oscillators 1 range is 4'.
Oscillators 2 range is 16'.
Noise timbre
Noise level is manually set to 17.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is set to 871.46Hz (209) and is modulated by Mod Wheel, Note Vel, LFO 2, VCF Env.
Note Vel modulates VCF Env (amount: -32), that in turn modulates high-pass filter cut-off frequency.
LFO 2 mod-matrix 1 modulation amount for high-pass filter cut-off frequency is 42.
VCF Env mod-matrix 3 modulation amount for high-pass filter cut-off frequency is -32.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 209.62Hz (61) and is modulated by Note Vel, LFO 2, VCF Env.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 70.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 61.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel mod-matrix 5 modulation amount for low-pass filter envelope amount is 53.
Note Num direct modulation amount for low-pass filter envelope amount is 152.
Filter has no resonance.
Oscillator drift & unison detuning timbre
Unison detune level is off.
Oscillators drift level is manually set to 21. Drift rate is 0
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to 1 semitones and is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 2 pitch is 141.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is off. Effect 2 level is off. Effect 3 level is off. Effect 4 level is manually set to 16.
Noise Gate fx
not yet complete
Mod Wheel modulator
Controls Mod Matrix Routing 1 Depth, HPF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| matrix | Mod Matrix Routing 1 Depth | 97 | |
| timbre | cross-mod | HPF Cut-off Frequency | 170*225 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 152 |
Note Vel modulator
Controls VCA Envelope Velocity Sensitivity, VCF Envelope, VCF Cut-off Frequency, HPF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| menu | VCA Envelope Velocity Sensitivity | 94 | |
| timbre | matrix | VCF Envelope | 53 |
| timbre | fader-indirect | VCF Cut-off Frequency | 61 |
| timbre | indirect | HPF Cut-off Frequency | -32 |
LFO 1 modulator
Controls OSC 1 Pulse Width Modulation Depth, OSC 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | OSC 1 Pulse Width Modulation Depth | 147 |
| pitch | fader | OSC 2 Pitch | 141 |
| name | value |
|---|---|
| LFO 1 Rate | 1.61Hz (127) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
LFO 2 modulator
Controls VCF Cut-off Frequency, HPF Cut-off Frequency, Pan Spread.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 70 |
| timbre | matrix | HPF Cut-off Frequency | 42 |
| volume | matrix | Pan Spread | 48 |
| name | value |
|---|---|
| LFO 2 Rate | 4.99Hz (166) |
| LFO 2 Delay / Fade | 0.21s (8) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 32s (255) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 3.53s (175) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency, HPF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 61 |
| timbre | matrix | HPF Cut-off Frequency | -32 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 1.09s (125) |
| VCF Envelope Sustain Level | 19% (48) |
| VCF Envelope Release Time | 1.38s (145) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |