VBGA572IFXKR7LZA Starship Pad OS by OscillatorSynk @ Deep[Re]Mind

Starship Pad OS by OscillatorSynk

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is manually set to 89% (50% is perfectly square, 100% is very short pulsewave).

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 79.

Tone for oscillator 2 is manually set to 70.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 32.

Oscillators ranges timbre

Oscillators 1 range is 8'.

Oscillators 2 range is 16'.

Noise timbre

Noise level is manually set to 3.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 43.48Hz (43).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 125.01Hz (39) and is modulated by Mod Wheel, Pressure, Note Vel, LFO 2, VCF Env.

Pressure mod-matrix 3 modulation amount for low-pass filter cut-off frequency is 25.

LFO 2 direct modulation amount for low-pass filter cut-off frequency is 32.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 167.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 166.

Note Num direct modulation amount for low-pass filter envelope amount is 98.

Filter resonance is statically set to 43% (110).

Oscillator drift & unison detuning timbre

Unison detune level is off.

Oscillators drift level is manually set to 21. Drift rate is 0

Performance triggering timbre

Envelope triggering mode is set to re-trigger.

Portamento pitch

Portamento time is set to 221 and is modulated by Note Num.

Note Num mod-matrix 1 modulation amount for portamento time is -28.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is off. Effect 2 level is off. Effect 3 level is off. Effect 4 level is manually set to 39.

Decimator Delay fx

not yet complete


Mod Wheel modulator

Controls LFO 2 Rate, VCF Cut-off Frequency.

functiontypedestinationamount
matrix LFO 2 Rate 38
timbre fader-indirect VCF Cut-off Frequency 32

Pressure modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre matrix VCF Cut-off Frequency 25

Note Num modulator

Controls VCF Keyboard Tracking, Portamento Time.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 98
pitch matrix Portamento Time -28

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 167
menu VCF Envelope Velocity Sensitivity 166
menu VCA Envelope Velocity Sensitivity 33

LFO 2 modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 32
namevalue
LFO 2 Rate 0.44Hz (82)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Triangle
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 0
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0.04s (7)
VCA Envelope Decay Time 1.13s (128)
VCA Envelope Sustain Level 100% (255)
VCA Envelope Release Time 9.22s (191)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 167
namevalue
VCF Envelope Attack Time 1.65s (163)
VCF Envelope Decay Time 1.65s (163)
VCF Envelope Sustain Level 50% (128)
VCF Envelope Release Time 13.85s (204)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 93
VCF Envelope Sustain Curve 104
VCF Envelope Attack Curve 0