VBGA572IFXKR7LZA Stalactite OS by OscillatorSynk @ Deep[Re]Mind

Stalactite OS by OscillatorSynk

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is manually set to 82% (50% is perfectly square, 100% is very short pulsewave).

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 176.

Tone for oscillator 2 is manually set to 78.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is set to 0 and is modulated by LFO 2.

LFO 2 mod-matrix 3 modulation amount for pan spread is 60.

Noise timbre

Noise level is manually set to 41.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 92.1Hz (26) and is modulated by Mod Wheel, Note Vel, LFO 2, VCF Env.

LFO 2 direct modulation amount for low-pass filter cut-off frequency is 84.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 137.

Low-pass filter envelope amount is modulated by Note Vel, Mod Wheel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 128.

Mod Wheel mod-matrix 4 modulation amount for low-pass filter envelope amount is 32.

Note Num direct modulation amount for low-pass filter envelope amount is 233.

Filter resonance is statically set to 40% (102).

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±7 cents (34).

Oscillators drift level is manually set to 19. Drift rate is 0

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to 11 semitones and is modulated by LFO 1.

LFO 1 mod-matrix 2 modulation amount for oscillator 2 pitch is 4.

Oscillator 2 pitch modulation is modulated by Note Vel.

Note Vel mod-matrix 1 modulation amount for oscillator 2 pitch modulation is 25.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 100. Effect 2 level is manually set to 15. Effect 3 level is off. Effect 4 level is manually set to 15.

Chorus D fx

not yet complete

Flange & Reverb fx

not yet complete

Flange & Reverb fx

not yet complete


Mod Wheel modulator

Controls OSC 1 Mod Wheel > Pitch Mod Depth, VCF Envelope, VCF Cut-off Frequency.

functiontypedestinationamount
pitch menu OSC 1 Mod Wheel > Pitch Mod Depth 7
timbre matrix VCF Envelope 32
timbre fader-indirect VCF Cut-off Frequency 137

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 233

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity, OSC 2 Pitch Modulation Depth.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 137
menu VCF Envelope Velocity Sensitivity 128
menu VCA Envelope Velocity Sensitivity 128
pitch matrix OSC 2 Pitch Modulation Depth 25

LFO 1 modulator

Controls OSC 2 Pitch.

functiontypedestinationamount
pitch matrix OSC 2 Pitch 4
namevalue
LFO 1 Rate 0.19Hz (53)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Triangle
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 0
LFO 1 Slew Rate 0

LFO 2 modulator

Controls VCF Cut-off Frequency, Pan Spread.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 84
volume matrix Pan Spread 60
namevalue
LFO 2 Rate 1.21Hz (117)
LFO 2 Delay / Fade 2.04s (79)
LFO 2 Shape Triangle
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 0
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0.18s (31)
VCA Envelope Decay Time 1.13s (128)
VCA Envelope Sustain Level 100% (255)
VCA Envelope Release Time 1.75s (170)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 137
namevalue
VCF Envelope Attack Time 0.02s (4)
VCF Envelope Decay Time 1.13s (128)
VCF Envelope Sustain Level 50% (128)
VCF Envelope Release Time 1.69s (166)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0