VBGA572IFXKR7LZA Sharmonia ST by Alex Koz @ Deep[Re]Mind

Sharmonia ST by Alex Koz

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is manually set to 85% (50% is perfectly square, 100% is very short pulsewave).

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 254.

Tone for oscillator 2 is manually set to 74.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 27.

Noise timbre

Noise level is manually set to 40.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 63.53Hz (64).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 18638.78Hz (252) and is modulated by Pressure, Note Num, Note Vel, LFO 1, LFO 2, VCF Env.

Pressure mod-matrix 1 modulation amount for low-pass filter cut-off frequency is 17.

LFO 1 mod-matrix 3 modulation amount for low-pass filter cut-off frequency is 9.

LFO 2 direct modulation amount for low-pass filter cut-off frequency is 6.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 112.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 255.

Note Num direct modulation amount for low-pass filter envelope amount is 116.

Filter resonance is statically set to 30% (76).

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±25 cents (128).

Oscillators drift level is manually set to 41. Drift rate is 29

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 6.

Portamento pitch

Portamento time is manually set to 10.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 100. Effect 2 level is manually set to 100. Effect 3 level is manually set to 50. Effect 4 level is manually set to 150.

Delay & Reverb fx

not yet complete

4-Tap Delay fx

not yet complete

Delay & Reverb fx

not yet complete

Stereo Imaging fx

not yet complete


Pressure modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre matrix VCF Cut-off Frequency 17

Note Num modulator

Controls VCF Keyboard Tracking, LFO 2 Rate, VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 116
matrix LFO 2 Rate 51
timbre fader-indirect VCF Cut-off Frequency 6

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 112
menu VCF Envelope Velocity Sensitivity 255
menu VCA Envelope Velocity Sensitivity 105

LFO 1 modulator

Controls OSC 1 Pitch, VCF Cut-off Frequency.

functiontypedestinationamount
pitch fader OSC 1 Pitch 6
timbre matrix VCF Cut-off Frequency 9
namevalue
LFO 1 Rate 1.87Hz (132)
LFO 1 Delay / Fade 2.12s (82)
LFO 1 Shape Sample & Glide
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 0
LFO 1 Slew Rate 0

LFO 2 modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 6
namevalue
LFO 2 Rate 0.6Hz (93)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Triangle
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 0
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0.66s (96)
VCA Envelope Decay Time 0.96s (116)
VCA Envelope Sustain Level 91% (232)
VCA Envelope Release Time 1.22s (134)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 125
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 88
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 112
namevalue
VCF Envelope Attack Time 0.49s (84)
VCF Envelope Decay Time 0.63s (94)
VCF Envelope Sustain Level 39% (100)
VCF Envelope Release Time 0.2s (34)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 129
VCF Envelope Decay Curve 39
VCF Envelope Sustain Curve 54
VCF Envelope Attack Curve 0