Phug Bass OS by OscillatorSynk

Oscillator 1 timbre

Only square oscillators are enabled, resulting in a narrow sounding tone.

Pulse width of square oscillator is set to 76% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 2.

LFO 2 direct modulation amount for pulse width of square oscillator is 133.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 177.

Tone for oscillator 2 is set to 50 and is modulated by Mod Wheel.

Mod Wheel mod-matrix 2 modulation amount for tone for oscillator 2 is 64.

Volume (VCA) volume

Amplification level is set to 1.76dB (195) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is off.

Oscillators ranges timbre

Oscillators 1 range is 4'.

Oscillators 2 range is 8'.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is set to 20Hz (0) and is modulated by Mod Wheel.

Mod Wheel mod-matrix 4 modulation amount for high-pass filter cut-off frequency is 51.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 252.96Hz (69) and is modulated by Mod Wheel, Note Vel, VCF Env.

Mod Wheel mod-matrix 3 modulation amount for low-pass filter cut-off frequency is -11.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 153.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 255.

Note Num direct modulation amount for low-pass filter envelope amount is 98.

Filter resonance is statically set to 5% (12).

Oscillator drift & unison detuning timbre

Unison detune level is set to ±11 cents (56) and is modulated by Note Num.

Note Num mod-matrix 1 modulation amount for unison detune level is 86.

Oscillators drift level is manually set to 19. Drift rate is 0

Performance triggering timbre

Envelope triggering mode is set to mono.

Oscillators are reset on keyboard presses.

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 5.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is off. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.

Mod Wheel modulator

Controls OSC 2 Tone Modulation Depth, VCF Cut-off Frequency, HPF Cut-off Frequency.

timbre matrix OSC 2 Tone Modulation Depth 64
timbre matrix VCF Cut-off Frequency -11
timbre matrix HPF Cut-off Frequency 51

Note Num modulator

Controls VCF Keyboard Tracking, Unison Detune.

timbre fader VCF Keyboard Tracking 98
timbre matrix Unison Detune 86

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.

timbre fader-indirect VCF Cut-off Frequency 153
menu VCF Envelope Velocity Sensitivity 255

LFO 1 modulator

Controls OSC 1 Pitch.

pitch fader OSC 1 Pitch 5
LFO 1 Rate 0.78Hz (102)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Triangle
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 0
LFO 1 Slew Rate 0

LFO 2 modulator

Controls OSC 1 Pulse Width Modulation Depth.

timbre fader OSC 1 Pulse Width Modulation Depth 133
LFO 2 Rate 0.25Hz (62)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Triangle
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 0
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

volume menu VCA Gain for All Voices 255
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 0.66s (96)
VCA Envelope Sustain Level 14% (37)
VCA Envelope Release Time 0.35s (59)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

timbre fader VCF Cut-off Frequency 153
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 0.32s (54)
VCF Envelope Sustain Level 16% (42)
VCF Envelope Release Time 0.33s (56)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 117
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 132