Outer Wall OS by OscillatorSynk
Oscillator 1 timbre
Only sawtooth oscillators are enabled, resulting in a harmonically rich content.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 213.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 73.
Noise timbre
Noise level is manually set to 170.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 77.49Hz (75).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 589.4Hz (105) and is modulated by Note Vel, LFO 2, VCF Env.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 71.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 79.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 255.
Note Num direct modulation amount for low-pass filter envelope amount is 165.
Filter resonance is statically set to 62% (158).
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±17 cents (88).
Oscillators drift level is manually set to 21. Drift rate is 0
Arpeggiator pitch
Arpeggiator rate is 33 bpm with a clock divider of 1/16 and is set to key synchronisation mode.
Arpeggiator gate is manually set to 128.
Arpeggiator mode is Up (0) over 2 octaves.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 33. Effect 2 level is manually set to 33. Effect 3 level is manually set to 33. Effect 4 level is manually set to 100.
Noise Gate fx
not yet complete
Noise Gate fx
not yet complete
Noise Gate fx
not yet complete
Phase fx
not yet complete
Mod Wheel modulator
Controls Noise Gate Param 2.
| function | type | destination | amount |
|---|---|---|---|
| fx | matrix | Noise Gate Param 2 | 77 |
| fx | matrix | Noise Gate Param 2 | 46 |
| fx | matrix | Noise Gate Param 2 | 82 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 165 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 79 |
| menu | VCF Envelope Velocity Sensitivity | 255 | |
| menu | VCA Envelope Velocity Sensitivity | 47 |
LFO 1 modulator
Controls Noise Gate Param 1.
| function | type | destination | amount |
|---|---|---|---|
| fx | matrix | Noise Gate Param 1 | 8 |
| fx | matrix | Noise Gate Param 1 | -7 |
| name | value |
|---|---|
| LFO 1 Rate | 0.04Hz (0) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Sine |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
LFO 2 modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 71 |
| name | value |
|---|---|
| LFO 2 Rate | 0.16Hz (48) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Sine |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 0.49s (83) |
| VCA Envelope Sustain Level | 8% (20) |
| VCA Envelope Release Time | 1.16s (130) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 79 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 1.47s (151) |
| VCF Envelope Sustain Level | 33% (85) |
| VCF Envelope Release Time | 1.13s (128) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |