Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).
Volume level for oscillator 2 is manually set to 84.
Tone for oscillator 2 is off.
Low-pass filter cut-off frequency is set to 368.4Hz (85) and is modulated by VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 76.
Filter resonance is statically set to 67% (172).
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
FX mode is set to Send, and routing is
Effect 1 level is off. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.
Controls VCA Gain for All Voices.
|volume||menu||VCA Gain for All Voices||255|
|VCA Envelope Attack Time||0s (0)|
|VCA Envelope Decay Time||11.36s (197)|
|VCA Envelope Sustain Level||0% (0)|
|VCA Envelope Release Time||1.06s (123)|
|VCA Envelope Trigger Mode||Key (0)|
|VCA Envelope Attack Curve||128|
|VCA Envelope Decay Curve||0|
|VCA Envelope Sustain Curve||128|
|VCA Envelope Attack Curve||0|
Controls VCF Cut-off Frequency.
|timbre||fader||VCF Cut-off Frequency||76|
|VCF Envelope Attack Time||0s (0)|
|VCF Envelope Decay Time||11.36s (197)|
|VCF Envelope Sustain Level||0% (0)|
|VCF Envelope Release Time||1.06s (123)|
|VCF Envelope Trigger Mode||Key (0)|
|VCF Envelope Attack Curve||128|
|VCF Envelope Decay Curve||0|
|VCF Envelope Sustain Curve||128|
|VCF Envelope Attack Curve||0|