Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 100% (50% is perfectly square, 100% is very short pulsewave).
Volume level for oscillator 2 is manually set to 113.
Tone for oscillator 2 is off.
Noise level is manually set to 50.
High-pass filter cut-off frequency is manually set to 181.09Hz (122).
Low-pass filter cut-off frequency is set to 434.26Hz (92) and is modulated by VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 54.
Low-pass filter envelope amount is modulated by Note Num.
Note Num direct modulation amount for low-pass filter envelope amount is 255.
Filter resonance is statically set to 45% (115).
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
Controls VCF Keyboard Tracking.
|timbre||fader||VCF Keyboard Tracking||255|
Controls VCA Gain for All Voices.
|volume||menu||VCA Gain for All Voices||255|
|VCA Envelope Attack Time||0s (0)|
|VCA Envelope Decay Time||1.47s (151)|
|VCA Envelope Sustain Level||0% (0)|
|VCA Envelope Release Time||1.28s (138)|
|VCA Envelope Trigger Mode||Key (0)|
|VCA Envelope Attack Curve||128|
|VCA Envelope Decay Curve||0|
|VCA Envelope Sustain Curve||128|
|VCA Envelope Attack Curve||0|
Controls VCF Cut-off Frequency.
|timbre||fader||VCF Cut-off Frequency||54|
|VCF Envelope Attack Time||0s (0)|
|VCF Envelope Decay Time||1.47s (151)|
|VCF Envelope Sustain Level||0% (0)|
|VCF Envelope Release Time||1.28s (138)|
|VCF Envelope Trigger Mode||Key (0)|
|VCF Envelope Attack Curve||128|
|VCF Envelope Decay Curve||0|
|VCF Envelope Sustain Curve||128|
|VCF Envelope Attack Curve||0|