VBGA572IFXKR7LZA Module 1 by Demonsk @ Deep[Re]Mind

Module 1 by Demonsk

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is set to 50% (50% is perfectly square, 100% is very short pulsewave) and is modulated by Mod Env.

Mod Env mod-matrix 1 modulation amount for pulse width of square oscillator is 110.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 104.

Tone for oscillator 2 is off.

Volume (VCA) volume

Amplification level is set to 5.15dB (243) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 45.

Oscillators ranges timbre

Oscillators 1 range is 16'.

Oscillators 2 range is 16'.

Noise timbre

Noise level is manually set to 128.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 858.37Hz (121) and is modulated by Note Vel, LFO 2, VCF Env.

LFO 2 direct modulation amount for low-pass filter cut-off frequency is 111.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 64.

Low-pass filter envelope amount is modulated by Note Vel, LFO 2, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 128.

LFO 2 mod-matrix 4 modulation amount for low-pass filter envelope amount is 14.

Note Num direct modulation amount for low-pass filter envelope amount is 121.

Filter resonance is statically set to 48% (122).

Oscillator drift & unison detuning timbre

Unison detune level is set to ±17 cents (86) and is modulated by Mod Wheel.

Mod Wheel mod-matrix 2 modulation amount for unison detune level is -21.

Oscillators drift level is manually set to 29. Drift rate is 33

Performance triggering timbre

Envelope triggering mode is set to mono.

Oscillators are reset on keyboard presses.

Tuning pitch

Patch Module 1 is transposed by -12 semitones.

FX routing & levels fx

FX mode is set to Insert, and routing is

Effect 1 level is manually set to 121. Effect 2 level is manually set to 139. Effect 3 level is manually set to 100. Effect 4 level is manually set to 100.

Flanger fx

not yet complete

Stereo Imaging fx

not yet complete

Enhancer fx

not yet complete

Phase fx

not yet complete


Mod Wheel modulator

Controls Unison Detune.

functiontypedestinationamount
timbre matrix Unison Detune -21

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 121

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 64
menu VCF Envelope Velocity Sensitivity 128
menu VCA Envelope Velocity Sensitivity 128

LFO 2 modulator

Controls VCF Cut-off Frequency, VCF Envelope.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 111
timbre matrix VCF Envelope 14
timbre fader-indirect VCF Cut-off Frequency 64
namevalue
LFO 2 Rate 0.14Hz (42)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Sine
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 0
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 0.21s (35)
VCA Envelope Sustain Level 32% (81)
VCA Envelope Release Time 1.26s (137)
VCA Envelope Trigger Mode Control Sequencer Step (4)
VCA Envelope Attack Curve 0
VCA Envelope Decay Curve 10
VCA Envelope Sustain Curve 0
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 64
namevalue
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 0.17s (29)
VCF Envelope Sustain Level 35% (89)
VCF Envelope Release Time 1.09s (125)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 81
VCF Envelope Decay Curve 69
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0

Mod Env modulator

Controls OSC 1 Pulse Width Modulation Depth.

functiontypedestinationamount
timbre matrix OSC 1 Pulse Width Modulation Depth 110
namevalue
Mod Envelope Attack Time 0.6s (92)
Mod Envelope Decay Time 13.14s (202)
Mod Envelope Sustain Level 63% (160)
Mod Envelope Release Time 0.33s (57)
Mod Envelope Trigger Mode Key (0)
Mod Envelope Attack Curve 128
Mod Envelope Decay Curve 0
Mod Envelope Sustain Curve 128
Mod Envelope Attack Curve 0

Ctrl Seq modulator

Controls VCA Envelope Trigger Mode, OSC 1 + 2 Pitch.

functiontypedestinationamount
volume env-trigger VCA Envelope Trigger Mode
pitch matrix OSC 1 + 2 Pitch 127
namevalue
Ctrl Sequencer Enable on
Ctrl Sequencer Clock Divider 12
Sequence Length 6
Sequencer Swing Timing 0
Key Sync & Loop 0
Slew Rate 12
Seq Step Value 1 126
Seq Step Value 2 147
Seq Step Value 3 150
Seq Step Value 4 140
Seq Step Value 5 143
Seq Step Value 6 149