MC Solo Doubler by Michal Cacko

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is manually set to 73% (50% is perfectly square, 100% is very short pulsewave).

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 118.

Tone for oscillator 2 is manually set to 82.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is off.

Noise timbre

Noise level is set to 136 and is modulated by Pressure.

Pressure mod-matrix 8 modulation amount for Noise level is -38.

Oscillator 2 FM timbre

experimental

Oscillator 2 pitch is modulated by Pressure, LFO 1.

LFO 1 direct modulation amount for oscillator 2 pitch is 9.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 177.85Hz (121).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 511.9Hz (99) and is modulated by Pressure, LFO 2.

Pressure modulates LFO 2 (amount: 3), that in turn modulates low-pass filter cut-off frequency. Pressure mod-matrix 6 modulation amount for low-pass filter cut-off frequency is -9.

LFO 2 mod-matrix 2 modulation amount for low-pass filter cut-off frequency is 3.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 128.

Note Num direct modulation amount for low-pass filter envelope amount is 255.

Filter resonance is set to 63 and is modulated by Pressure.

Pressure mod-matrix 3 modulation amount for filter resonance is 14.

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±7 cents (36).

Oscillators drift level is manually set to 24. Drift rate is 15

Performance triggering timbre

Envelope triggering mode is set to re-trigger.

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to 0 semitones and is modulated by Pressure, LFO 1.

LFO 1 direct modulation amount for oscillator 2 pitch is 9.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 150.

Unknown FX fx

not yet complete

Multi-Band Distortion fx

not yet complete

Flange & Reverb fx

not yet complete

Delay fx

not yet complete


Pressure modulator

Controls VCF Resonance, LFO 2 Rate, VCF Cut-off Frequency, LFO 1 Rate, OSC 2 Pitch, UNKNOWN DESTINATION, Noise Level.

functiontypedestinationamount
timbre matrix VCF Resonance 14
matrix LFO 2 Rate 44
timbre indirect VCF Cut-off Frequency 3
matrix LFO 1 Rate 58
pitch fader-indirect OSC 2 Pitch 9
timbre matrix VCF Cut-off Frequency -9
fx matrix UNKNOWN DESTINATION 48
timbre matrix Noise Level -38

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 255

Note Vel modulator

Controls VCF Envelope Velocity Sensitivity.

functiontypedestinationamount
menu VCF Envelope Velocity Sensitivity 128

LFO 1 modulator

Controls OSC 2 Pitch.

functiontypedestinationamount
pitch fader OSC 2 Pitch 9
namevalue
LFO 1 Rate 0.17Hz (49)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Sine
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 1
LFO 1 Slew Rate 144

LFO 2 modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre matrix VCF Cut-off Frequency 3
namevalue
LFO 2 Rate 0.51Hz (87)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Sine
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 1
LFO 2 Slew Rate 125

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 0s (0)
VCA Envelope Sustain Level 100% (255)
VCA Envelope Release Time 0s (0)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0