VBGA572IFXKR7LZA MC Rurnet by Michał Cacko @ Deep[Re]Mind

MC Rurnet by Michał Cacko

Oscillator 1 timbre

Only square oscillators are enabled, resulting in a narrow sounding tone.

Pulse width of square oscillator is manually set to 74% (50% is perfectly square, 100% is very short pulsewave).

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 74.

Tone for oscillator 2 is set to 82 and is modulated by LFO 2.

LFO 2 mod-matrix 1 modulation amount for tone for oscillator 2 is 127.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 127.

Noise timbre

Noise level is set to 55 and is modulated by Ctrl Seq.

Ctrl Seq mod-matrix 2 modulation amount for Noise level is 50.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

Oscillator 1 FM timbre

experimental

Oscillator 1 pitch is modulated by LFO 1, Ctrl Seq.

LFO 1 direct modulation amount for oscillator 1 pitch is 2.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is set to 20Hz (0) and is modulated by Mod Wheel.

Mod Wheel mod-matrix 5 modulation amount for high-pass filter cut-off frequency is 53.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 335.36Hz (81) and is modulated by Note Vel, VCF Env.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 95.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 128.

Note Num direct modulation amount for low-pass filter envelope amount is 111.

Filter resonance is statically set to 42% (107).

Oscillator drift & unison detuning timbre

Unison detune level is set to ±10 cents (53) and is modulated by Ctrl Seq.

Ctrl Seq mod-matrix 3 modulation amount for unison detune level is 65.

Oscillators drift level is off.

Performance triggering timbre

Envelope triggering mode is set to mono.

Oscillators are reset on keyboard presses.

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by LFO 1, Ctrl Seq.

LFO 1 direct modulation amount for oscillator 1 pitch is 2.

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to 12 semitones and is modulated by Mod Wheel.

Mod Wheel mod-matrix 7 modulation amount for oscillator 2 pitch is 19.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 100.

Multi-Band Distortion fx

not yet complete

Rich Plate Reverb fx

not yet complete

Noise Gate fx

not yet complete

Delay fx

not yet complete


Mod Wheel modulator

Controls HPF Cut-off Frequency, FX 4 Level, OSC 2 Pitch.

functiontypedestinationamount
timbre matrix HPF Cut-off Frequency 53
fx matrix FX 4 Level 127
pitch matrix OSC 2 Pitch 19

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 111

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 95
menu VCF Envelope Velocity Sensitivity 128

LFO 1 modulator

Controls OSC 1 Pitch.

functiontypedestinationamount
pitch fader OSC 1 Pitch 2
namevalue
LFO 1 Rate 0.04Hz (0)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Triangle
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 1
LFO 1 Slew Rate 0

LFO 2 modulator

Controls OSC 2 Tone Modulation Depth.

functiontypedestinationamount
timbre matrix OSC 2 Tone Modulation Depth 127
namevalue
LFO 2 Rate 1.66Hz (128)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Triangle
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 1
LFO 2 Slew Rate 115

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0.05s (8)
VCA Envelope Decay Time 0s (0)
VCA Envelope Sustain Level 100% (255)
VCA Envelope Release Time 0.28s (48)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 95
namevalue
VCF Envelope Attack Time 0.24s (40)
VCF Envelope Decay Time 1.1s (126)
VCF Envelope Sustain Level 14% (37)
VCF Envelope Release Time 0.31s (53)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0

Ctrl Seq modulator

Controls Noise Level, Unison Detune, LFO 1 Rate, OSC 1 Pitch.

functiontypedestinationamount
timbre matrix Noise Level 50
timbre matrix Unison Detune 65
matrix LFO 1 Rate 127
pitch fader-indirect OSC 1 Pitch 2
namevalue
Ctrl Sequencer Enable on
Ctrl Sequencer Clock Divider 9
Sequence Length 6
Sequencer Swing Timing 0
Key Sync & Loop 1
Slew Rate 0
Seq Step Value 1 130
Seq Step Value 2 131
Seq Step Value 3 197
Seq Step Value 4 234
Seq Step Value 5 128
Seq Step Value 6 183