MC Ju106 EP1 by MichaƂ Cacko

Oscillator 1 timbre

Only square oscillators are enabled, resulting in a narrow sounding tone.

Pulse width of square oscillator is manually set to 89% (50% is perfectly square, 100% is very short pulsewave).

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 16.

Oscillators ranges timbre

Oscillators 1 range is 16'.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 186.38Hz (56) and is modulated by LFO 2, VCF Env.

LFO 2 direct modulation amount for low-pass filter cut-off frequency is 107.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 55.

Low-pass filter envelope amount is modulated by Note Num.

Note Num direct modulation amount for low-pass filter envelope amount is 218.

Filter has no resonance.

Performance triggering timbre

Envelope triggering mode is set to mono.

Oscillators are reset on keyboard presses.

FX routing & levels fx

FX mode is set to Insert, and routing is

Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 150.

Reverse Reverb fx

not yet complete

Flanger fx

not yet complete

Phase fx

not yet complete

Delay fx

not yet complete


Mod Wheel modulator

Controls Delay Param 4.

functiontypedestinationamount
fx matrix Delay Param 4 32

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 218

LFO 2 modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 107
namevalue
LFO 2 Rate 0.04Hz (0)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Triangle
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 1
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 0.42s (72)
VCA Envelope Sustain Level 100% (255)
VCA Envelope Release Time 0.33s (57)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 55
namevalue
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 0.42s (72)
VCF Envelope Sustain Level 100% (255)
VCF Envelope Release Time 0.33s (57)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0