MC Ju106 ArpOne by MichaƂ Cacko

Oscillator 1 timbre

Only square oscillators are enabled, resulting in a narrow sounding tone.

Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is off.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 50Hz (0) and is modulated by LFO 1, VCF Env.

LFO 1 direct modulation amount for low-pass filter cut-off frequency is 192.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 232.

Low-pass filter envelope amount is modulated by Note Num.

Note Num direct modulation amount for low-pass filter envelope amount is 108.

Filter has no resonance.

Performance triggering timbre

Envelope triggering mode is set to mono.

Oscillators are reset on keyboard presses.

Arpeggiator pitch

Arpeggiator rate is 120 bpm with a clock divider of 1/16 and is set to key synchronisation mode.

Arpeggiator gate is manually set to 0.

Arpeggiator mode is Up (0) over 2 octaves.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 0. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.

Reverse Reverb fx

not yet complete


Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 108

LFO 1 modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 192
namevalue
LFO 1 Rate 0.22Hz (58)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Triangle
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 1
LFO 1 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 0.48s (81)
VCA Envelope Sustain Level 0% (0)
VCA Envelope Release Time 0.46s (79)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 232
namevalue
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 0.48s (81)
VCF Envelope Sustain Level 0% (0)
VCF Envelope Release Time 0.46s (79)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0