MC Ju106 80s <3 by Michał Cacko

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is set to 74% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 1.

LFO 1 direct modulation amount for pulse width of square oscillator is 125.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 102.

Tone for oscillator 2 is off.

Volume (VCA) volume

Amplification level is set to -2.4dB (136) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is off.

Noise timbre

Noise level is manually set to 135.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 1373.27Hz (141) and is modulated by VCF Env.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 88.

Filter resonance is statically set to 11% (28).

Performance triggering timbre

Envelope triggering mode is set to mono.

Oscillators are reset on keyboard presses.

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 16.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 0. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.

Reverse Reverb fx

not yet complete

LFO 1 modulator

Controls OSC 1 Pulse Width Modulation Depth, OSC 1 Pitch.

timbre fader OSC 1 Pulse Width Modulation Depth 125
pitch fader OSC 1 Pitch 16
LFO 1 Rate 1.92Hz (133)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Triangle
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 1
LFO 1 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

volume menu VCA Gain for All Voices 255
VCA Envelope Attack Time 0.69s (98)
VCA Envelope Decay Time 0.39s (66)
VCA Envelope Sustain Level 11% (29)
VCA Envelope Release Time 3.53s (175)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

timbre fader VCF Cut-off Frequency 88
VCF Envelope Attack Time 0.69s (98)
VCF Envelope Decay Time 0.39s (66)
VCF Envelope Sustain Level 11% (29)
VCF Envelope Release Time 3.53s (175)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0