VBGA572IFXKR7LZA MC Hate U by Michał Cacko @ Deep[Re]Mind

MC Hate U by Michał Cacko

Oscillator 1 timbre

Only square oscillators are enabled, resulting in a narrow sounding tone.

Pulse width of square oscillator is set to 50% (50% is perfectly square, 100% is very short pulsewave) and is modulated by Ctrl Seq.

Ctrl Seq mod-matrix 4 modulation amount for pulse width of square oscillator is 86.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 255.

Tone for oscillator 2 is set to 71 and is modulated by Mod Wheel.

Mod Wheel mod-matrix 7 modulation amount for tone for oscillator 2 is 127.

Volume (VCA) volume

Amplification level is set to -4.38dB (108) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 88.

Noise timbre

Noise level is set to 50 and is modulated by Ctrl Seq.

Ctrl Seq mod-matrix 3 modulation amount for Noise level is 8.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 20000Hz (255) and is modulated by LFO 2.

LFO 2 mod-matrix 6 modulation amount for low-pass filter cut-off frequency is 16.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 128.

Note Num direct modulation amount for low-pass filter envelope amount is 75.

Filter has no resonance.

Oscillator drift & unison detuning timbre

Unison detune level is set to ±16 cents (83) and is modulated by LFO 1.

LFO 1 mod-matrix 5 modulation amount for unison detune level is 73.

Oscillators drift level is manually set to 52. Drift rate is 9

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to 12 semitones and is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 2 pitch is 103.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 100. Effect 2 level is manually set to 100. Effect 3 level is manually set to 49. Effect 4 level is manually set to 26.

Multi-Band Distortion fx

not yet complete

Noise Gate fx

not yet complete

Unknown FX fx

not yet complete

Delay fx

not yet complete


Mod Wheel modulator

Controls OSC 2 Tone Modulation Depth.

functiontypedestinationamount
timbre matrix OSC 2 Tone Modulation Depth 127

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 75

Note Vel modulator

Controls VCF Envelope Velocity Sensitivity.

functiontypedestinationamount
menu VCF Envelope Velocity Sensitivity 128

LFO 1 modulator

Controls OSC 2 Pitch, Multi-Band Distortion Param 2, Unison Detune, VCA Pan.

functiontypedestinationamount
pitch fader OSC 2 Pitch 103
fx matrix Multi-Band Distortion Param 2 20
timbre matrix Unison Detune 73
volume matrix VCA Pan -21
namevalue
LFO 1 Rate 0.47Hz (84)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Square
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 1
LFO 1 Slew Rate 159

LFO 2 modulator

Controls Noise Gate Param 1, VCF Cut-off Frequency.

functiontypedestinationamount
fx matrix Noise Gate Param 1 127
timbre matrix VCF Cut-off Frequency 16
namevalue
LFO 2 Rate 0.12Hz (37)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Triangle
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 1
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 1.13s (128)
VCA Envelope Sustain Level 100% (255)
VCA Envelope Release Time 1.13s (128)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

Ctrl Seq modulator

Controls Noise Level, OSC 1 Pulse Width Modulation Depth.

functiontypedestinationamount
timbre matrix Noise Level 8
timbre matrix OSC 1 Pulse Width Modulation Depth 86
namevalue
Ctrl Sequencer Enable on
Ctrl Sequencer Clock Divider 7
Sequence Length 6
Sequencer Swing Timing 0
Key Sync & Loop 0
Slew Rate 0
Seq Step Value 1 128
Seq Step Value 2 232
Seq Step Value 3 128
Seq Step Value 4 237
Seq Step Value 5 128
Seq Step Value 6 128