MC Brass RoSe by Michał Cacko
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to -1.2dB (153) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 63.
Oscillators ranges timbre
Oscillators 1 range is 8'.
Oscillators 2 range is 4'.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 50Hz (0) and is modulated by Note Vel, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 199.
Low-pass filter envelope amount is modulated by Note Vel.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Filter has no resonance.
Oscillator 1 pitch pitch
Oscillator 1 pitch is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 1 pitch is 46.
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to -12 semitones and is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 2 pitch is 1.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is off.
Reverse Reverb fx
not yet complete
Delay fx
not yet complete
Flanger fx
not yet complete
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 199 |
| menu | VCF Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls OSC 1 Pitch, OSC 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 1 Pitch | 46 |
| pitch | fader | OSC 2 Pitch | 1 |
| name | value |
|---|---|
| LFO 1 Rate | 6.47Hz (175) |
| LFO 1 Delay / Fade | 2.15s (83) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0.26s (45) |
| VCA Envelope Decay Time | 7.09s (185) |
| VCA Envelope Sustain Level | 24% (62) |
| VCA Envelope Release Time | 0.75s (102) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 199 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0.18s (31) |
| VCF Envelope Decay Time | 1.68s (165) |
| VCF Envelope Sustain Level | 29% (75) |
| VCF Envelope Release Time | 0.45s (76) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |