MC 80s Space by Michał Cacko
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 77% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 255.
Tone for oscillator 2 is manually set to 70.
Volume (VCA) volume
Amplification level is set to 0.71dB (180) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 58.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is set to 20Hz (0) and is modulated by Mod Wheel.
Mod Wheel mod-matrix 4 modulation amount for high-pass filter cut-off frequency is 110.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 1111.52Hz (132) and is modulated by Mod Wheel, Note Vel, LFO 1, LFO 2, VCF Env.
Mod Wheel modulates LFO 2 (amount: -19), that in turn modulates low-pass filter cut-off frequency.
LFO 1 modulates LFO 2 (amount: -19), that in turn modulates low-pass filter cut-off frequency.
LFO 2 mod-matrix 1 modulation amount for low-pass filter cut-off frequency is -19.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 43.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 141.
Filter resonance is statically set to 48% (123).
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±22 cents (115).
Oscillators drift level is off.
Performance triggering timbre
Envelope triggering mode is set to mono.
Oscillators are reset on keyboard presses.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 150.
Flanger fx
not yet complete
Stereo Imaging fx
not yet complete
Chorus & Reverb fx
not yet complete
Delay fx
not yet complete
Mod Wheel modulator
Controls HPF Cut-off Frequency, Delay Param 1, LFO 1 Rate, LFO 2 Rate, VCF Cut-off Frequency, Noise Level.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | HPF Cut-off Frequency | 110 |
| fx | matrix | Delay Param 1 | 127 |
| matrix | LFO 1 Rate | 6 | |
| indirect | LFO 2 Rate | 127 | |
| timbre | indirect | VCF Cut-off Frequency | -19 |
| timbre | indirect | Noise Level | 66 |
| matrix | LFO 2 Rate | 24 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 141 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 43 |
| menu | VCF Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls LFO 2 Rate, VCF Cut-off Frequency, Noise Level.
| function | type | destination | amount |
|---|---|---|---|
| matrix | LFO 2 Rate | 127 | |
| timbre | indirect | VCF Cut-off Frequency | -19 |
| timbre | indirect | Noise Level | 66 |
| name | value |
|---|---|
| LFO 1 Rate | 1.21Hz (117) |
| LFO 1 Delay / Fade | 2.97s (115) |
| LFO 1 Shape | Ramp Up |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
LFO 2 modulator
Controls VCF Cut-off Frequency, Noise Level.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Cut-off Frequency | -19 |
| timbre | matrix | Noise Level | 66 |
| name | value |
|---|---|
| LFO 2 Rate | 2.88Hz (147) |
| LFO 2 Delay / Fade | 1.94s (75) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.59s (159) |
| VCA Envelope Sustain Level | 0% (0) |
| VCA Envelope Release Time | 9.58s (192) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 43 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0.4s (68) |
| VCF Envelope Sustain Level | 0% (0) |
| VCF Envelope Release Time | 0s (0) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |