MC 80s Movie by Michał Cacko
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is set to 75% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 2.
LFO 2 mod-matrix 1 modulation amount for pulse width of square oscillator is 46.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 115.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to -2.96dB (128) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 62.
Oscillators ranges timbre
Oscillators 1 range is 8'.
Oscillators 2 range is 4'.
Noise timbre
Noise level is manually set to 53.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 150.86Hz (47) and is modulated by Note Vel, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 147.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 156.
Filter resonance is statically set to 19% (49).
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±3 cents (15).
Oscillators drift level is off.
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to 7 semitones and is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 2 pitch is 1.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 150.
Flanger fx
not yet complete
Flanger fx
not yet complete
Chorus D fx
not yet complete
Phase fx
not yet complete
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 156 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 147 |
| menu | VCF Envelope Velocity Sensitivity | 128 |
LFO 1 modulator
Controls OSC 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 2 Pitch | 1 |
| name | value |
|---|---|
| LFO 1 Rate | 0.34Hz (73) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Triangle |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
LFO 2 modulator
Controls OSC 1 Pulse Width Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | OSC 1 Pulse Width Modulation Depth | 46 |
| name | value |
|---|---|
| LFO 2 Rate | 1.24Hz (118) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0.02s (4) |
| VCA Envelope Decay Time | 13.85s (204) |
| VCA Envelope Sustain Level | 8% (20) |
| VCA Envelope Release Time | 5.66s (181) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 147 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0.01s (1) |
| VCF Envelope Decay Time | 4.24s (177) |
| VCF Envelope Sustain Level | 12% (31) |
| VCF Envelope Release Time | 18.12s (216) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |