VBGA572IFXKR7LZA Imp Pad OS by OscillatorSynk @ Deep[Re]Mind

Imp Pad OS by OscillatorSynk

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is set to 86% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 1.

LFO 1 direct modulation amount for pulse width of square oscillator is 182.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 212.

Tone for oscillator 2 is off.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 5.

Noise timbre

Noise level is manually set to 91.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 70.8Hz (70).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 143.93Hz (45) and is modulated by Pressure, Note Vel, LFO 1, VCF Env.

Pressure mod-matrix 2 modulation amount for low-pass filter cut-off frequency is 37.

LFO 1 direct modulation amount for low-pass filter cut-off frequency is 50.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 120.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 162.

Note Num direct modulation amount for low-pass filter envelope amount is 121.

Filter resonance is statically set to 66% (169).

Oscillator drift & unison detuning timbre

Unison detune level is off.

Oscillators drift level is manually set to 12. Drift rate is 0

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to 2 semitones and is modulated by LFO 2.

LFO 2 direct modulation amount for oscillator 2 pitch is 97.

Oscillator 2 pitch modulation is modulated by Mod Wheel.

Mod Wheel mod-matrix 1 modulation amount for oscillator 2 pitch modulation is 88.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 0. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.

TC Deep Reverb fx

not yet complete


Mod Wheel modulator

Controls OSC 2 Pitch Modulation Depth.

functiontypedestinationamount
pitch matrix OSC 2 Pitch Modulation Depth 88

Pressure modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre matrix VCF Cut-off Frequency 37

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 121

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 120
menu VCF Envelope Velocity Sensitivity 162
menu VCA Envelope Velocity Sensitivity 107

LFO 1 modulator

Controls OSC 1 Pulse Width Modulation Depth, VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader OSC 1 Pulse Width Modulation Depth 182
timbre fader VCF Cut-off Frequency 50
namevalue
LFO 1 Rate 0.28Hz (67)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Triangle
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 0
LFO 1 Slew Rate 0

LFO 2 modulator

Controls OSC 2 Pitch.

functiontypedestinationamount
pitch fader OSC 2 Pitch 97
namevalue
LFO 2 Rate 0.6Hz (93)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Sample & Hold
LFO 2 Key Sync off
LFO 2 Arp Sync on
LFO 2 Mono Mode 0
LFO 2 Slew Rate 18

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 1.57s (158)
VCA Envelope Decay Time 6.73s (184)
VCA Envelope Sustain Level 21% (54)
VCA Envelope Release Time 11.71s (198)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 120
namevalue
VCF Envelope Attack Time 1.62s (161)
VCF Envelope Decay Time 19.9s (221)
VCF Envelope Sustain Level 30% (76)
VCF Envelope Release Time 21.32s (225)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0