HurtRoom EP OS by OscillatorSynk
Oscillator 1 timbre
Only sawtooth oscillators are enabled, resulting in a harmonically rich content.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 144.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 19.
Noise timbre
Noise level is set to 63 and is modulated by Note Num.
Note Num mod-matrix 1 modulation amount for Noise level is -56.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 145.81Hz (110).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 335.36Hz (81) and is modulated by Mod Wheel, LFO 2.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 54.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 255.
Note Num direct modulation amount for low-pass filter envelope amount is 168.
Filter resonance is statically set to 67% (171).
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±15 cents (76).
Oscillators drift level is manually set to 25. Drift rate is 0
Tuning pitch
Patch HurtRoom EP OS is transposed by 12 semitones.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is off. Effect 2 level is manually set to 0. Effect 3 level is off. Effect 4 level is manually set to 36.
Plate Reverb fx
not yet complete
Mod, Delay & Reverb fx
not yet complete
Mod Wheel modulator
Controls FX 2 Level, LFO 2 Rate, VCF Cut-off Frequency, VCA Pan.
| function | type | destination | amount |
|---|---|---|---|
| fx | matrix | FX 2 Level | 20 |
| matrix | LFO 2 Rate | 11 | |
| timbre | fader-indirect | VCF Cut-off Frequency | 54 |
| volume | indirect | VCA Pan | 56 |
Note Num modulator
Controls VCF Keyboard Tracking, Noise Level.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 168 |
| timbre | matrix | Noise Level | -56 |
Note Vel modulator
Controls VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| menu | VCF Envelope Velocity Sensitivity | 255 | |
| menu | VCA Envelope Velocity Sensitivity | 32 |
LFO 2 modulator
Controls VCF Cut-off Frequency, VCA Pan.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 54 |
| volume | matrix | VCA Pan | 56 |
| name | value |
|---|---|
| LFO 2 Rate | 1.66Hz (128) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 0.18s (30) |
| VCA Envelope Sustain Level | 53% (136) |
| VCA Envelope Release Time | 1.57s (158) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |