HopeVibrationOS by OscillatorSynk

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is manually set to 76% (50% is perfectly square, 100% is very short pulsewave).

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 168.

Tone for oscillator 2 is set to 62 and is modulated by Mod Wheel, LFO 2.

Mod Wheel mod-matrix 1 modulation amount for tone for oscillator 2 is 94.

LFO 2 direct modulation amount for tone for oscillator 2 is 63.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 34.

Noise timbre

Noise level is manually set to 90.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 101.6Hz (90).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 230.27Hz (65) and is modulated by Note Vel, LFO 2, VCF Env.

LFO 2 direct modulation amount for low-pass filter cut-off frequency is 34.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 205.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 128.

Note Num direct modulation amount for low-pass filter envelope amount is 72.

Filter resonance is set to 50 and is modulated by Pressure.

Pressure mod-matrix 3 modulation amount for filter resonance is 23.

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±25 cents (127).

Oscillators drift level is manually set to 28. Drift rate is 0

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 2.

Oscillator 2 pitch pitch

Oscillator 2 pitch modulation is modulated by Note Vel.

Note Vel mod-matrix 2 modulation amount for oscillator 2 pitch modulation is 40.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is off. Effect 2 level is off. Effect 3 level is off. Effect 4 level is off.


Mod Wheel modulator

Controls OSC 2 Tone Modulation Depth.

functiontypedestinationamount
timbre matrix OSC 2 Tone Modulation Depth 94

Pressure modulator

Controls VCF Resonance.

functiontypedestinationamount
timbre matrix VCF Resonance 23

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 72

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity, OSC 2 Pitch Modulation Depth.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 205
menu VCF Envelope Velocity Sensitivity 128
menu VCA Envelope Velocity Sensitivity 88
pitch matrix OSC 2 Pitch Modulation Depth 40

LFO 1 modulator

Controls OSC 1 Pitch.

functiontypedestinationamount
pitch fader OSC 1 Pitch 2
namevalue
LFO 1 Rate 1.66Hz (128)
LFO 1 Delay / Fade 0s (0)
LFO 1 Shape Sine
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 0
LFO 1 Slew Rate 0

LFO 2 modulator

Controls OSC 2 Tone Modulation Depth, VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader OSC 2 Tone Modulation Depth 63
timbre fader VCF Cut-off Frequency 34
namevalue
LFO 2 Rate 0.68Hz (97)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Square
LFO 2 Key Sync off
LFO 2 Arp Sync on
LFO 2 Mono Mode 0
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 1.13s (128)
VCA Envelope Sustain Level 100% (255)
VCA Envelope Release Time 18.12s (216)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 205
namevalue
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 9.58s (192)
VCF Envelope Sustain Level 26% (67)
VCF Envelope Release Time 12.07s (199)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0