VBGA572IFXKR7LZA HarpsiBell12 RM by Rob @ Deep[Re]Mind

HarpsiBell12 RM by Rob

Oscillator 1 timbre

Only square oscillators are enabled, resulting in a narrow sounding tone.

Pulse width of square oscillator is manually set to 87% (50% is perfectly square, 100% is very short pulsewave).

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 202.

Tone for oscillator 2 is manually set to 56.

Volume (VCA) volume

Amplification level is set to 4.09dB (228) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 87.

Noise timbre

Noise level is set to 0 and is modulated by Mod Env.

Mod Env mod-matrix 1 modulation amount for Noise level is 42.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 201.81Hz (128).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 305.27Hz (77) and is modulated by Note Vel, VCF Env.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 255.

Low-pass filter envelope amount is modulated by Note Vel.

Note Vel direct modulation amount for low-pass filter envelope amount is 128.

Filter has no resonance.

Oscillator drift & unison detuning timbre

Unison detune level is off.

Oscillators drift level is manually set to 27. Drift rate is 5

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 12.

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to 12 semitones and is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 2 pitch is 38.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is off.

Reverse Reverb fx

not yet complete

Flange & Reverb fx

not yet complete

Ambient Reverb fx

not yet complete


Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 255
menu VCF Envelope Velocity Sensitivity 128

LFO 1 modulator

Controls OSC 1 Pitch, OSC 2 Pitch.

functiontypedestinationamount
pitch fader OSC 1 Pitch 12
pitch fader OSC 2 Pitch 38
namevalue
LFO 1 Rate 1.4Hz (122)
LFO 1 Delay / Fade 3.7s (143)
LFO 1 Shape Triangle
LFO 1 Key Sync off
LFO 1 Arp Sync on
LFO 1 Mono Mode 2
LFO 1 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 3.89s (176)
VCA Envelope Sustain Level 0% (0)
VCA Envelope Release Time 0s (0)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 106
VCA Envelope Decay Curve 113
VCA Envelope Sustain Curve 103
VCA Envelope Attack Curve 112

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 255
namevalue
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 0.87s (110)
VCF Envelope Sustain Level 4% (10)
VCF Envelope Release Time 0.79s (105)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0

Mod Env modulator

Controls Noise Level.

functiontypedestinationamount
timbre matrix Noise Level 42
namevalue
Mod Envelope Attack Time 0.16s (27)
Mod Envelope Decay Time 1.04s (122)
Mod Envelope Sustain Level 34% (86)
Mod Envelope Release Time 0.78s (104)
Mod Envelope Trigger Mode Key (0)
Mod Envelope Attack Curve 128
Mod Envelope Decay Curve 0
Mod Envelope Sustain Curve 128
Mod Envelope Attack Curve 0