VBGA572IFXKR7LZA Dyno Lead OS by OscillatorSynk @ Deep[Re]Mind

Dyno Lead OS by OscillatorSynk

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is manually set to 77% (50% is perfectly square, 100% is very short pulsewave).

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 61.

Tone for oscillator 2 is off.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by Note Vel, VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is off.

Noise timbre

Noise level is manually set to 63.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 190.81Hz (57) and is modulated by Mod Wheel, Note Vel, VCF Env.

Mod Wheel mod-matrix 4 modulation amount for low-pass filter cut-off frequency is 16.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 124.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 255.

Note Num direct modulation amount for low-pass filter envelope amount is 146.

Filter resonance is statically set to 25% (63).

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±18 cents (91).

Oscillators drift level is manually set to 38. Drift rate is 0

Performance triggering timbre

Envelope triggering mode is set to legato.

Oscillators are reset on keyboard presses.

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 8.

Portamento pitch

Portamento time is manually set to 66.

Tuning pitch

Patch Dyno Lead OS is transposed by -6 semitones.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is off. Effect 2 level is off. Effect 3 level is off. Effect 4 level is manually set to 34.

Decimator Delay fx

not yet complete


Mod Wheel modulator

Controls OSC 1 Mod Wheel > Pitch Mod Depth, VCF Cut-off Frequency, VCA Gain for Active Voices.

functiontypedestinationamount
pitch menu OSC 1 Mod Wheel > Pitch Mod Depth 18
timbre matrix VCF Cut-off Frequency 16
volume matrix VCA Gain for Active Voices 80

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 146

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity, All Attack Times, VCA Gain for All Voices.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 124
menu VCF Envelope Velocity Sensitivity 255
menu VCA Envelope Velocity Sensitivity 30
timbre,volume,pitch matrix All Attack Times 79
volume menu-indirect VCA Gain for All Voices 255

Voice Num modulator

Controls OSC 1 + 2 Pitch, UNKNOWN DESTINATION.

functiontypedestinationamount
pitch matrix OSC 1 + 2 Pitch 30
fx matrix UNKNOWN DESTINATION -50

LFO 1 modulator

Controls OSC 1 Pitch.

functiontypedestinationamount
pitch fader OSC 1 Pitch 8
namevalue
LFO 1 Rate 3.96Hz (158)
LFO 1 Delay / Fade 2.27s (88)
LFO 1 Shape Triangle
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 0
LFO 1 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0.07s (12)
VCA Envelope Decay Time 0.65s (95)
VCA Envelope Sustain Level 25% (64)
VCA Envelope Release Time 0.46s (78)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 124
namevalue
VCF Envelope Attack Time 0.04s (7)
VCF Envelope Decay Time 0.79s (105)
VCF Envelope Sustain Level 12% (30)
VCF Envelope Release Time 0.45s (77)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 128
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 128
VCF Envelope Attack Curve 0