Dliopz OS by OscillatorSynk
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 230.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 41.
Oscillators ranges timbre
Oscillators 1 range is 16'.
Oscillators 2 range is 16'.
Noise timbre
Noise level is manually set to 128.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 177.85Hz (121).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 988.32Hz (127) and is modulated by LFO 2.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 15.
Low-pass filter envelope amount is modulated by Note Num.
Note Num direct modulation amount for low-pass filter envelope amount is 255.
Filter resonance is statically set to 78% (199).
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±10 cents (52).
Oscillators drift level is off.
Performance triggering timbre
Envelope triggering mode is set to re-trigger.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is off. Effect 2 level is off. Effect 3 level is manually set to 100. Effect 4 level is manually set to 100.
Phase fx
not yet complete
Flange & Reverb fx
not yet complete
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 255 |
Note Vel modulator
Controls VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| menu | VCA Envelope Velocity Sensitivity | 30 |
LFO 2 modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 15 |
| name | value |
|---|---|
| LFO 2 Rate | 4.19Hz (160) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 0.19s (32) |
| VCA Envelope Sustain Level | 14% (35) |
| VCA Envelope Release Time | 0.51s (86) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |