DirtorganbassOS by OscillatorSynk
Oscillator 1 timbre
Only sawtooth oscillators are enabled, resulting in a harmonically rich content.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 84.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is off.
Noise timbre
Noise level is manually set to 23.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 83.84Hz (22) and is modulated by Note Vel, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 99.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 255. Note Vel mod-matrix 1 modulation amount for low-pass filter envelope amount is 52.
Note Num direct modulation amount for low-pass filter envelope amount is 138.
Filter resonance is statically set to 54% (137).
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±19 cents (99).
Oscillators drift level is manually set to 30. Drift rate is 0
Performance triggering timbre
Envelope triggering mode is set to legato.
Portamento pitch
Portamento time is manually set to 104.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is off. Effect 4 level is off.
Fair Compressor fx
not yet complete
Plate Reverb fx
not yet complete
Mod Wheel modulator
Controls FX 4 Level, Plate Reverb Param 4.
| function | type | destination | amount |
|---|---|---|---|
| fx | matrix | FX 4 Level | 17 |
| fx | matrix | Plate Reverb Param 4 | 35 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 138 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCF Envelope.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 99 |
| menu | VCF Envelope Velocity Sensitivity | 255 | |
| timbre | matrix | VCF Envelope | 52 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.13s (128) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 0.31s (52) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 99 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 1.13s (128) |
| VCF Envelope Sustain Level | 19% (48) |
| VCF Envelope Release Time | 0.37s (63) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 128 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |