DeepEP4 BC by Behringer

Oscillator 1 timbre

Only square oscillators are enabled, resulting in a narrow sounding tone.

Pulse width of square oscillator is set to 65% (50% is perfectly square, 100% is very short pulsewave) and is modulated by Note Num.

Note Num mod-matrix 5 modulation amount for pulse width of square oscillator is 87.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 140.

Tone for oscillator 2 is set to 52 and is modulated by Note Vel.

Note Vel mod-matrix 7 modulation amount for tone for oscillator 2 is 125.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by Note Num, VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is off.

Noise timbre

Noise level is manually set to 63.

OSC 1→2 sync timbre

to be completed

Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 67.07Hz (67).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 343.33Hz (82) and is modulated by Note Vel, VCF Env.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 139.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 132.

Note Num direct modulation amount for low-pass filter envelope amount is 80.

Filter has no resonance.

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±20 cents (104).

Oscillators drift level is manually set to 17. Drift rate is 0

Performance triggering timbre

Envelope triggering mode is set to re-trigger.

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to -12 semitones and is modulated by Mod Env.

Mod Env mod-matrix 6 modulation amount for oscillator 2 pitch is 41.

FX routing & levels fx

FX mode is set to Insert, and routing is

Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 150.

Plate Reverb fx

not yet complete

Auto-Panning fx

not yet complete

Gated Reverb fx

not yet complete

TC Deep Reverb fx

not yet complete


Mod Wheel modulator

Controls Gated Reverb Param 5.

functiontypedestinationamount
fx matrix Gated Reverb Param 5 95

Note Num modulator

Controls VCF Keyboard Tracking, VCA Env Decay Time, VCA Gain for All Voices, VCA Env Release Time, OSC 1 Pulse Width Modulation Depth.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 80
volume matrix VCA Env Decay Time -101
volume menu-indirect VCA Gain for All Voices 255
volume matrix VCA Env Release Time -34
timbre matrix OSC 1 Pulse Width Modulation Depth 87

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity, OSC 2 Tone Modulation Depth, Plate Reverb Param 2.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 139
menu VCF Envelope Velocity Sensitivity 132
menu VCA Envelope Velocity Sensitivity 149
timbre matrix OSC 2 Tone Modulation Depth 125
fx matrix Plate Reverb Param 2 23

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 24.17s (233)
VCA Envelope Sustain Level 0% (0)
VCA Envelope Release Time 0.45s (76)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 128
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 128
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 139
namevalue
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 0.41s (69)
VCF Envelope Sustain Level 44% (112)
VCF Envelope Release Time 0.46s (78)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 95
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 81
VCF Envelope Attack Curve 0

Mod Env modulator

Controls OSC 2 Pitch.

functiontypedestinationamount
pitch matrix OSC 2 Pitch 41
namevalue
Mod Envelope Attack Time 0s (0)
Mod Envelope Decay Time 32s (255)
Mod Envelope Sustain Level 100% (255)
Mod Envelope Release Time 32s (255)
Mod Envelope Trigger Mode Loop (3)
Mod Envelope Attack Curve 128
Mod Envelope Decay Curve 0
Mod Envelope Sustain Curve 0
Mod Envelope Attack Curve 0