BeverlyHillsC64 by Fer_Svengali
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 93% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Noise timbre
Noise level is manually set to 71.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is manually set to 1184.62Hz (226).
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 3771.68Hz (184) and is modulated by Pressure, Note Vel, VCF Env.
Pressure mod-matrix 2 modulation amount for low-pass filter cut-off frequency is -25.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 66.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 97.
Filter resonance is set to 0 and is modulated by Pressure.
Pressure mod-matrix 1 modulation amount for filter resonance is 60.
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±28 cents (143).
Oscillators drift level is manually set to 13. Drift rate is 0
Oscillator 1 pitch pitch
Oscillator 1 pitch is modulated by LFO 2.
LFO 2 direct modulation amount for oscillator 1 pitch is 10.
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to 12 semitones and is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 2 pitch is 10.
Portamento pitch
Portamento time is manually set to 76.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is off. Effect 2 level is off. Effect 3 level is manually set to 100. Effect 4 level is manually set to 150.
Flange & Reverb fx
not yet complete
Vintage Room Reverb fx
not yet complete
Mod Wheel modulator
Controls OSC 2 Level.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | OSC 2 Level | 64 |
Pressure modulator
Controls VCF Resonance, VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Resonance | 60 |
| timbre | matrix | VCF Cut-off Frequency | -25 |
Note Num modulator
Controls VCF Keyboard Tracking, VCA Env Attack Time, VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 97 |
| volume | matrix | VCA Env Attack Time | 0 |
| volume | menu-indirect | VCA Gain for All Voices | 255 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 66 |
| menu | VCF Envelope Velocity Sensitivity | 128 | |
| menu | VCA Envelope Velocity Sensitivity | 72 |
LFO 1 modulator
Controls OSC 2 Tone Modulation Depth, OSC 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | OSC 2 Tone Modulation Depth | 150 |
| pitch | fader | OSC 2 Pitch | 10 |
| name | value |
|---|---|
| LFO 1 Rate | 18.32Hz (211) |
| LFO 1 Delay / Fade | 0s (0) |
| LFO 1 Shape | Square |
| LFO 1 Key Sync | on |
| LFO 1 Arp Sync | on |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 8 |
LFO 2 modulator
Controls OSC 1 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 1 Pitch | 10 |
| name | value |
|---|---|
| LFO 2 Rate | 20.57Hz (215) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Square |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | on |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 0.76s (103) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 0s (0) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 66 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0s (0) |
| VCF Envelope Sustain Level | 0% (0) |
| VCF Envelope Release Time | 0s (0) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 95 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |