VBGA572IFXKR7LZA Analog Glass RM by Rob @ Deep[Re]Mind

Analog Glass RM by Rob

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 255.

Tone for oscillator 2 is manually set to 63.

Volume (VCA) volume

Amplification level is set to -2.12dB (140) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 100.

Oscillators ranges timbre

Oscillators 1 range is 8'.

Oscillators 2 range is 4'.

High-pass filter (HPF) timbre

High-pass filter cut-off frequency is manually set to 42.7Hz (42).

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 617.75Hz (107) and is modulated by Mod Wheel, Note Vel, VCF Env.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 133.

Low-pass filter envelope amount is modulated by Note Vel, Mod Wheel.

Note Vel direct modulation amount for low-pass filter envelope amount is 128.

Mod Wheel mod-matrix 1 modulation amount for low-pass filter envelope amount is 127.

Filter resonance is set to 32 and is modulated by Mod Wheel.

Mod Wheel mod-matrix 2 modulation amount for filter resonance is 67.

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±8 cents (41).

Oscillators drift level is manually set to 36. Drift rate is 0

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 14.

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to 0 semitones and is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 2 pitch is 10.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 68.

Reverse Reverb fx

not yet complete

Multi-Band Distortion fx

not yet complete

Phase fx

not yet complete

Ambient Reverb fx

not yet complete


Mod Wheel modulator

Controls VCF Envelope, VCF Cut-off Frequency, VCF Resonance, Reverse Reverb Param 5.

functiontypedestinationamount
timbre matrix VCF Envelope 127
timbre fader-indirect VCF Cut-off Frequency 133
timbre matrix VCF Resonance 67
fx matrix Reverse Reverb Param 5 0

Note Vel modulator

Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 133
menu VCF Envelope Velocity Sensitivity 128
menu VCA Envelope Velocity Sensitivity 100

LFO 1 modulator

Controls OSC 1 Pitch, OSC 2 Pitch.

functiontypedestinationamount
pitch fader OSC 1 Pitch 14
pitch fader OSC 2 Pitch 10
namevalue
LFO 1 Rate 3.84Hz (157)
LFO 1 Delay / Fade 1.99s (77)
LFO 1 Shape Triangle
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 0
LFO 1 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 3.89s (176)
VCA Envelope Sustain Level 0% (0)
VCA Envelope Release Time 1.26s (137)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 0
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 0
VCA Envelope Attack Curve 0

VCF Env modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 133
namevalue
VCF Envelope Attack Time 0s (0)
VCF Envelope Decay Time 0.47s (80)
VCF Envelope Sustain Level 0% (0)
VCF Envelope Release Time 0s (0)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 183
VCF Envelope Decay Curve 103
VCF Envelope Sustain Curve 39
VCF Envelope Attack Curve 255