5 Lake Way by Reech
Oscillator 1 timbre
Both sawtooth and square oscillators are enabled.
Pulse width of square oscillator is manually set to 50% (50% is perfectly square, 100% is very short pulsewave).
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 114.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is off.
Oscillators ranges timbre
Oscillators 1 range is 16'.
Oscillators 2 range is 8'.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 214.6Hz (62) and is modulated by Note Vel, VCF Env, Ctrl Seq.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 124.
Ctrl Seq mod-matrix 2 modulation amount for low-pass filter cut-off frequency is 52.
Low-pass filter envelope amount is modulated by Note Vel, Note Num.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Note Num direct modulation amount for low-pass filter envelope amount is 100.
Filter resonance is set to 0 and is modulated by Mod Wheel.
Mod Wheel mod-matrix 3 modulation amount for filter resonance is 74.
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±16 cents (81).
Oscillators drift level is off.
Arpeggiator pitch
Arpeggiator rate is 120 bpm with a clock divider of 1/8 and is set to key synchronisation mode.
Arpeggiator gate is manually set to 255.
Arpeggiator mode is Up&Down (2) over 1 octaves. Looping gate/velocity pattern is preset pattern 20.
FX routing & levels fx
FX mode is set to Insert, and routing is
Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is off.
Flange & Reverb fx
not yet complete
Tel-Ray Delay fx
not yet complete
Auto-Panning fx
not yet complete
Mod Wheel modulator
Controls VCF Resonance.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Resonance | 74 |
Note Num modulator
Controls VCF Keyboard Tracking.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Keyboard Tracking | 100 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 124 |
| menu | VCF Envelope Velocity Sensitivity | 128 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0s (0) |
| VCA Envelope Decay Time | 1.13s (128) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 1.13s (128) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 124 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0s (0) |
| VCF Envelope Decay Time | 0.75s (102) |
| VCF Envelope Sustain Level | 0% (0) |
| VCF Envelope Release Time | 1.13s (128) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 0 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |
Ctrl Seq modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | VCF Cut-off Frequency | 52 |
| name | value |
|---|---|
| Ctrl Sequencer Enable | off |
| Ctrl Sequencer Clock Divider | 10 |
| Sequence Length | 2 |
| Sequencer Swing Timing | 0 |
| Key Sync & Loop | 0 |
| Slew Rate | 0 |
| Seq Step Value 1 | 196 |
| Seq Step Value 2 | 93 |